2.3.1.31 BAT1030 : "The <Controller name> battery charge level is normal."
When event is generated, message will have the following substitutions:
• <Controller name> = "RAID Controller in Slot 5"
2.3.1.32 BAT1031 : "The battery temperature on <controller name> is above normal."
When event is generated, message will have the following substitutions:
• <controller name> = "RAID Controller in Slot 5"
2.3.1.33 BAT1032 : "The battery temperature on <controller name> is normal."
When event is generated, message will have the following substitutions:
• <controller name> = "RAID Controller in Slot 5"
2.3.1.34 BAT1033 : "The battery on <controller name> was removed."
When event is generated, message will have the following substitutions:
• <controller name> = "RAID Controller in Slot 5"
2.3.1.35 BAT1034 : "The battery properties for <controller name> have changed."
When event is generated, message will have the following substitutions:
• <controller name> = "RAID Controller in Slot 5"
2.3.1.36 BAT1035 : "The battery temperature on <controller name> is above the normal
operating temperature."
When event is generated, message will have the following substitutions:
• <controller name> = "Controller 1 (PERC H800 Adapter)"
2.3.1.37 BAT1036 : "The battery on <controller name> is discharging."
When event is generated, message will have the following substitutions:
• <controller name> = "Controller 1 (PERC H800 Adapter)"
2.3.2 Subcategory= Cable [MessageID prefix =CBL]
2.3.2.1 CBL8500 : "SAS cable <cable id> to expander <expander id> is not connected."
When event is generated, message will have the following substitutions:
• <cable id> = ""
2.3.2.2 CBL8501 : "SAS cable <cable id> is connected to the incorrect expander."
When event is generated, message will have the following substitutions:
• <cable id> = ""
171
Kommentare zu diesen Handbüchern