Virtual Console FCD-CFxx Technical Information PDF herunterladen (Seite 569)

3.4.3.21 BAT0030 : "The system board battery is reading low."

3.4.3.22 BAT0031 : "The system board battery status is unknown."

3.4.4 Subcategory= Cable [MessageID prefix =CBL]

3.4.4.1 CBL0001 : "Backplane <bay ID> power cable disconnected."

When event is generated, message will have the following substitutions:

• <bay ID> = "1"

3.4.4.2 CBL0002 : "Backplane <bay ID> signal cable disconnected."

When event is generated, message will have the following substitutions:

• <bay ID> = "1"

3.4.4.3 CBL0003 : "Backplane <bay ID> <cable name> cable is disconnected."

When event is generated, message will have the following substitutions:

• <bay ID> = "1"

• <cable name> = "B2"

3.4.4.4 CBL0004 : "The <cable name> cable is incorrectly connected to backplane <bay ID>

connector <connector name>."

When event is generated, message will have the following substitutions:

• <cable name> = "B2"

• <bay ID> = "1"

• <connector name> = "PERC SAS B0"

3.4.4.5 CBL0005 : "Backplane <bay ID> <connector name> connector incorrectly connected

to the motherboard SATA controller."

When event is generated, message will have the following substitutions:

• <bay ID> = "1"

• <connector name> = "Chipset SATA B0"

3.4.4.6 CBL0006 : "Unsupported backplane <bay ID> configuration: Multiple RAID

controllers cannot be connected to the same backplane."

When event is generated, message will have the following substitutions:

• <bay ID> = "1"

3.4.4.7 CBL0007 : "Backplane <bay ID> <cable name> cable and backplane <bay ID> <cable

name> cable are swapped."

When event is generated, message will have the following substitutions:

• <bay ID> = "1"

569

1 2 ... 564 565 566 567 568 569 570 571 572 573 574 ... 919 920

Kommentare zu diesen Handbüchern

Keine Kommentare